Cusp Points in the Parameter Space of Degenerate 3-RPR Planar Parallel Manipulators

This paper investigates the conditions in the design parameter space for the existence and distribution of the cusp locus for planar parallel manipulators. Cusp points make possible non-singular assembly-mode changing motion, which increases the maximum singularity-free workspace. An accurate algorithm for the determination is proposed amending some imprecisions done by previous existing algorithms. This is combined with methods of Cylindric Algebraic Decomposition, Gr\"obner bases and Discriminant Varieties in order to partition the parameter space into cells with constant number of cusp points. These algorithms will allow us to classify a family of degenerate 3-RPR manipulators.Comment: ASME Journal of Mechanisms and Robotics (2012) 1-1

Minimal canonical comprehensive Gröbner systems

This is the continuation of Montes' paper "On the canonical discussion of polynomial systems with parameters''. In this paper, we define the Minimal Canonical Comprehensive Gröbner System of a parametric ideal and fix under which hypothesis it exists and is computable. An algorithm to obtain a canonical description of the segments of the Minimal Canonical CGS is given, thus completing the whole MCCGS algorithm (implemented in Maple and Singular). We show its high utility for applications, such as automatic theorem proving and discovering, and compare it with other existing methods. A way to detect a counterexample to deny its existence is outlined, although the high number of tests done give evidence of the existence of the Minimal Canonical CGS.Postprint (published version

A motion planning approach to 6-D manipulation with aerial towed-cable systems

Presentado al International Micro Air Vehicle Conference and Flight Competition celebrado en Toulouse (Francia) del 17 al 20 de septiembre de 2013.We propose a new approach for the reliable 6-dimensional quasi-static manipulation with aerial towed- cable systems. The novelty of this approach lies in the combination of results deriving from the static analysis of cable-driven manipulators with a cost-based motion-planning algorithm to solve manipulation queries. Such a combination of methods is able to produce feasible paths that do not approach dangerous/uncontrollable configurations of the system. As part of our approach, we also propose an original system that we name the FlyCrane. It consists of a platform attached to three flying robots using six fixed-length cables. Results of simulations on 6-D quasi-static manipulation problems show the interest of the method.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under contract DPI2010-18449, by the European Community under contract ICT 287617 “ARCAS”, and by a Juan de la Cierva contract supporting the first author.Peer Reviewe

Computing wrench-feasible paths for cable-driven hexapods

Motion paths of cable-driven hexapods must carefully be planned to ensure that the lengths and tensions of all cables remain within acceptable limits, for a given wrench applied to the platform. The cables cannot go slack -to keep the control of the robot- nor excessively tight -to prevent cable breakage- even in the presence of bounded perturbations of the wrench. This paper proposes a path planning method that accommodates such constraints simultaneously. Given two configurations of the robot, the method attempts to connect them through a path that, at any point, allows the cables to counteract any wrench lying in a predefined uncertainty region. The feasible C-space is placed in correspondence with a smooth manifold, which facilitates the definition of a continuation strategy to search this space systematically from one configuration, until the second configuration is found, or path non-existence is proved at the resolution of the search. The force Jacobian is full rank everywhere on the C-space, which implies that the computed paths will naturally avoid crossing the forward singularity locus of the robot. The adjustment of tension limits, moreover, allows to maintain a meaningful clearance relative to such locus. The approach is applicable to compute paths subject to geometric constraints on the platform pose, or to synthesize free-flying motions in the full six-dimensional C-space. Experiments are included that illustrate the performance of the method in a real prototype.Postprint (published version

Planning wrench-feasible motions for cable-driven hexapods

Motion paths of cable-driven hexapods must carefully be planned to ensure that the lengths and tensions of all cables remain within acceptable limits, for a given wrench applied to the platform. The cables cannot go slack-to keep the control of the robot-nor excessively tightto prevent cable breakage-even in the presence of bounded perturbations of the wrench. This paper proposes a path-planning method that accommodates such constraints simultaneously. Given two configurations of the robot, the method attempts to connect them through a path that, at any point, allows the cables to counteract any wrench lying in a predefined uncertainty region. The configuration space, or C-space for short, is placed in correspondence with a smooth manifold, which facilitates the definition of a continuation strategy to search this space systematically from one configuration, until the second configuration is found, or path nonexistence is proved by exhaustion of the search. The force Jacobian is full rank everywhere on the C-space, which implies that the computed paths will naturally avoid crossing the forward singularity locus of the robot. The adjustment of tension limits, moreover, allows to maintain a meaningful clearance relative to such locus. The approach is applicable to compute paths subject to geometric constraints on the platform pose or to synthesize free-flying motions in the full 6-D C-space. Experiments illustrate the performance of the method in a real prototype.Postprint (author's final draft

Planning singularity-free force-feasible paths on the Stewart platform

This paper provides a method for computing force-feasible paths on the Stewart platform. Given two configurations of the platform, the method attempts to connect them through a path that, at any point, allows the platform to counteract any external wrench lying inside a predefined six-dimensional region. In particular, the Jacobian matrix of the manipulator will be full rank along such path, so that the path will not traverse the forward singularity locus at any point. The path is computed by first characterizing the force-feasible C-space of the manipulator as the solution set of a system of equations, and then using a higher-dimensional continuation technique to explore this set systematically from one configuration, until the second configuration is found. Examples are included that demonstrate the performance of the method on illustrative situations.Preprin

A general method for the numerical computation of manipulator singularity sets

The analysis of singularities is central to the development and control of a manipulator. However, existing methods for singularity set computation still concentrate on specific classes of manipulators. The absence of general methods able to perform such computation on a large class of manipulators is problematic because it hinders the analysis of unconventional manipulators and the development of new robot topologies. The purpose of this paper is to provide such a method for nonredundant mechanisms with algebraic lower pairs and designated input and output speeds. We formulate systems of equations that describe the whole singularity set and each one of the singularity types independently, and show how to compute the configurations in each type using a numerical technique based on linear relaxations. The method can be used to analyze manipulators with arbitrary geometry, and it isolates the singularities with the desired accuracy. We illustrate the formulation of the conditions and their numerical solution with examples, and use 3-D projections to visualize the complex partitions of the configuration space induced by the singularities.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under contract DPI2010-18449, and by a Juan de la Cierva contract supporting the fourth author.Peer Reviewe

6-D manipulation with aerial towed-cable system

We propose a new approach for the reliable 6-dimensional quasi-static manipulation of an aerial towed-cable system. The novelty of this approach lies in the combination of results deriving from the static analysis of cable-driven manipulators with the application of a cost-based motion-planning algorithm to solve manipulation queries. Using this approach, we can ensure that the produced paths are feasible and do not approach dangerous configurations that could provoque the malfunction of the system. The approach has been simulated on the FlyCrane, consisting of a platform attached to three flying robots using six fixed-length cables. The obtained results show the success and the suitability of the approach.Postprint (author’s final draft

On the numerical classification of the singularities of robot manipulators

This paper is concerned with the task to obtain a complete description of the singularity set of any given non-redundant manipulator, including the identification and the precise computation of each constituent singularity class. Configurations belonging to the same class are equivalent in terms of the various types of kinematic and static degeneracy that characterize mechanism singularity. The proposed approach is an extension of recent work on computing singularities using a numerical method based on linear relaxations. Classification is sought by means of a hierarchy of singularity tests, each formulated as a system of quadratic or linear equations, which yields sets of classes to which an identified singularity cannot belong. A planar manipulator exemplifies the process of classification, and illustrates how, while most singularities get completely classified, for some lower-dimensional subsets one can only identify a restricted list of possible singularity classes.Postprint (published version